News
On rent APE 200-6 & S-150
This is a good example of a project which was carried out by a hydraulic impact hammer IHC S-150 and a hydraulic vibratory hammer APE 200-6 driven by one GREEN power unit.
APE Holland equipment for removing Russian "Murmansk" cruiser
On the 24th of December, 1994, the Russian cruiser broke free while being towed, and partially sank outside a small village, on an island on the north coast of Norway. This seas are very rough and the area is subject to extreme weather conditions. Now the Norwegian contractor AF Decom is using an APE Model 200, supplied by APE Holland, for constructing a barrier and a double skin sheet pile wall around the wreck, to enable removal of it. A 24 hours webcam shows progress of the job.
New address message APE Holland B.V.
We are moving to a new facility on the first of january 2010. Company growth due to expansion, determines to move to our new location. We are better capable to continue the combined activities in this new location.
Press release - Hillcon Piling Equipment taken over by CAPE Holland
Beilen / Werkendam – Hillcon Piling Equipment has been taken over by the CAPE Holland Holding, the holding company under which the companies Construction and Piling Equipment (CAPE Holland) and APE Holland are active as well. By this acquisition and the intensive cooperation between the companies, a complete package of supply can be offered for the foundation industry.
An other APE 250V set at work in St. Petersburg
APE Holland delivered the third APE Model 250V to St. Petersburg within one year. This APE vibratory hammer has to replace old vibratory hammers which were owned by the company for several years already. The choice for APE vibratory hammers was a combination of powerfull equipment, with low own weight, combined with a positive price level.
APE 120V delivered to Minsk, Belarus
APE Holland provided the first hydraulically operated vibratory driver / extractor of the whole country of Belarus to the company Spetcinzstroi. Spetcinzstroi has chosen for the APE Model 120V for the competative pricing, and low maintenance costs. Further the power of the APE 120V is higher with a lower own weight, compared to competition.
APE 200-6 offshore in Vietnam
In the Chinese Sea in Vietnam, APE Holland is working with an APE Model 200-6 with a quad clamp, for mooring pile installation. For the mooring pile installation for the Su Tu Vang FSO installation project, the APE 200-6 has to drive 60” piles. The piles have to be driven under water, with a maximum pile penetration below seabed level of 30 meters (98 ft). The water depth is 54 meters (175 ft.) max.
Second APE diesel hammer in one year for Dutch contractor
A Dutch contractor recently received the second APE diesel hammer in one year. After working with an APE D46 diesel hammer for some months, a bigger hammer was needed for this contractor. Delivery of an APE D62 diesel hammer took place at the end of August.
APE Model 170V and 250V teams up in St. Petersburg, Russia
APE Holland delivered two APE Model 170V and one Model 250V variable moment vibratory hammers to a customer in St. Petersburg, Russia.
APE Model 200 working under water in Greece
An APE Model 200 was delivered to a customer in Greece, for driving wick drain under water at Thessaloniki. The drain of 15 meter length has to be driven up to 10 meters under water. The APE Model 200 performed very well, without adaptations made to the machine.
APE D62 diesel hammer to Turkmenistan
APE Holland is sending an APE D62 diesel hammer to Turkmenistan. The hammer will be delivered with a rope suspended leader which is refurbished by CAPE Holland.
APE Model 6 in Sweden
For driving single sheet piles in an extremely narrow area, a Swedish contractor contacted APE Holland with the question if they had the solution.
APE Holland sents an other hammer to Surinam
For a bridge building project in Surinam, APE Holland deliveres a D46 diesel hammer to Surinam.
Yeti built in Persian Gulf with APE equipment #2
APE Holland delivered an APE Model 200 vibratory hammer and an APE D36 diesel hammer to the Persian Gulf for building a new yeti. In October the D36 with a flying leader is commissioned.
APE D36 Teams Up With APE Tandem Model 50 in St. Martin
APE Holland has successfully set up an APE Model D36 and a Model 50 Tandem to drive pipe piles in St. Martin.
